If your fridge door seal is not sticking properly, your appliance will not be able to maintain optimal temperatures. This can lead to your food spoiling more quickly and higher energy bills. Fixing your door seal is essential to keeping your refrigerator running efficiently.
Does Your Fridge Door Seal is Not Sticking?
If your fridge door seal is not sticking, you can do a few things to try and fix the problem. First, check the seal to ensure it is clean and free of dirt or debris. If the seal is dirty, clean it with a block of mild soap and water. If the seal is still not sticking, you may need to replace it.
You may also like: Full Size Refrigerator Under $500
Here are some tips on how to fix a refrigerator door seal:
1. Properly Clean the Refrigerator Door Seal
It is important to regularly clean the door seal on your refrigerator to ensure it is properly sealing. To properly clean the refrigerator door seal, mix a tablespoon of baking soda with a quart of warm water. Use a brush to scrub the seal, then wipe it down with a microfiber cloth. Repeat this process every few months to keep the seal clean and debris-free. This way, your fridge door seal is the sticking problem that will be solved.
2. Currently Adjusting the Door Seal
If your door seal isn’t adjusted correctly, your fridge must work harder to keep the cold air in. Fortunately, adjusting your door seal is a quick and easy fix.
- Make sure that your fridge is unplugged.
- Open the door and check to see if the seal is tight around.
- If it isn’t, use your hands to push it into place gently.
Once the seal is tight, close the door and plug your fridge back in.
Now, open the door and check the temperature inside. If it is higher than it should be, adjust the thermostat accordingly.
3. Replacing the Door Seal
If your door seal is damaged, it is important to repair it as soon as possible to prevent further damage to your door and frame. Many things can damage a door seal, such as weather, wear and tear, or even insects.
So, if you may need to replace it, a new door seal can be purchased at most hardware stores. To install the new seal, remove the old one and replace it with the new one. Make sure that the new seal is properly aligned before closing the door. And get free from your fridge door seal sticking problem.
By following those steps, you can easily replace your refrigerator door seal.
Step 1: For your refrigerator model number, purchase a new door seal.
Step 2: Unpackage your new door seal before reinstalling your refrigerator in the last 24 hours.
Step 3: Before installing your door seal, place it in warm water for twenty minutes. This will help straighten any bends and make the seal more pliable. It will ensure a tight, secure fit. And dry the seal with a microfiber cloth to prevent mold and mildew.
Step 4: Remove the refrigerator door’s old seal. First, loosen the hex head retainer screw. Next, use a putty knife or another sharp object to loosen the old sealant. Once the old sealant is removed, you can apply a new sealant to the door.
Step 5: Clean up all over the old seal area.
Step 6: Before setting the new seal on your refrigerator door, apply a thin layer of silicone grease or petroleum jelly to the side of the door seal that sticks to the refrigerator. It will help the seal slide more easily and prevent it from sticking.
Step 7: Position and install the new door seal, starting with the top corners. Then work around the door, ensuring the seal is properly positioned.
After installing the door seal, check that it sits evenly around the door and is attached to the refrigerator. If the door seal needs to be adjusted, use low heat from a hairdryer or lubricant to make it more flexible.
1 thought on “How to Fix Refrigerator Door Seal? [Step by Step]”
Maintaining your refrigerator can be a simple process. The inside cabinets of refrigerators should be cleaned at least once a month.